Keetouch Nano Foil is an advanced new generation projected-capacitive multitouch film.
This unique product has pushed the limits of touch technology. With its help, any non-conductive surface turns into a touch panel or interactive screen. Among the most popular examples are shop windows, office partitions, mirrors in fitting rooms, straight or curved walls, bar racks, etc. Faultless operation, precise touch response and compatibility with any surface makes it an ideal fit for most environments.
Nano Foil is a possible solution for large touch surfaces of unlimited sizes (Touch Film sizes are not limited to the ones stated on the website page. And can be customized by request).
Projected-capacitive touch film is bonded on the inside of any hard transparent surface, for instance, a shop window, office partition, window or mirror. The outside surface becomes interactive: users can manipulate content without touching the film directly. The glass behind which the film is fixed protects this film from mechanical damage or climate influence and increases its durability.
The touch film is fixed on the inside of the transparent surface, followed by the rear projection film, turning the outer surface into a touch screen. There should be a small gap between the film and the monitor.
The film is fixed on the inside of a transparent surface (window, mirror, glass). The monitor is being installed behind the film. There must be a gap between the film and the monitor.
Projected-capacitive touch film works perfectly under protective glass up to 8 mm thickness without reducing accuracy or response time. With the help of the Nano Foil interactive touch film, huge interactive surfaces, curved and complex surfaces, as well as touch areas with no visible frames can be created. The controller and FPC cable can be located at the bottom, or on the side of the active area. Capacitive film has more than 90% transparency level; its thickness is 150 microns.
Lightning-fast response:
- Touch accuracy ≥ 3 mm, which can be compared with resistive touch screens
- Responds to touch 70% faster than infrared frames
- Fail-safe
- Smooth writing without break points
The touch film is applied to one side of the glass, opposite to the side that is being touched by users. Surface glass protects the film from vandalism, mechanical damage, moisture and dust. Keetouch films are not being affected by ultraviolet radiation. It is perfect for both indoors and outdoors: working temperature is -15 ° C to +75 ° C, resistant to temperature and humidity changes. The service life of the sensor film is ≥ 9 years.
- Image scaling
- Gesture control
- Multiple users interface
